50mm² Trolley Busbar System

Type：BHFS-5-50A/225
Rated Current (A)：225
Unit dimensions (mm)：3016 x 86 x 65
Unit Weight (kg)：12.9
Equivalent to 50mm² Copper Cable

Trolley Busbar System is a new type of power transmission and distribution device, the shell is made of high-quality insulating materials, embedded with five transmission aluminium conductors as transmission busbars and equipped with a mobile current collector. It is simple, compact, safe, reliable and energy efficient.
The lenth of each one is 3016 mm long (equivalent to the height of two standard masts) and is mounted directly on a standard mast with iron fasteners. Its creation effectively solves the problems of short cable life, easy to be stolen, easy to be broken in windy weather and other problems affecting safe construction that have plagued customers for years.

Categories: Conductor Busbar, Busbar System Tag: Trolley Busbar System

Product standards

Our products comply with ISO 9001, CE and CQC standards.

50mm² Trolley Busbar System with features:

Trolley busbar system is fixed to the mast section and the weight is spread over the mast sections, which does not increase the load on the cage and reduces energy consumption.
Unaffected by bad weather: no matter how strong the wind is, it is stationary and will not affect the operation of the construction hoist.
Trolley busbar system is not easy to lose after dismantling.
Easy replacement of damaged parts: damaged parts can be replaced in situ without dismantling the whole system.
When a limited fault occurs, the current collector will go over the top of trolley busbar system and automatically cut off the power, then stop the operation of the hoist.
Its height can be increased according to the progress of the project: each section is 3.016 metres long, the same height as the two mast sections, and can be inserted section by section and increased in height according to the progress of the project.
Recyclable: it has a service life of 4-6 years and can be used twice after the completion of a project.

Project Cases:

Case 1: Taipei Fubon Life A25 Building

Product model: BHFS-5-50A/225
Initial installation date: 2020-10
Total height: 260 meters
Elevator manufacturer: Guangzhou Jinglong

50mm2 Trolley Busbar System project case

Case 2: Japan SANSEI KENKI Project

Product model: BHFS-5-50A/225
Initial installation date: 2018-3
Total height: 120 meters

Parameters for 50mm² Trolley Busbar System:

Name of Parameter	Value
Rated Current	225A
Rated Voltage	380V/690V
Power Supply Method	Three-phase five-wire
Unit Dimension	3016 x 86 x 65mm
Unit Weight	12.9kg
Enclosure Protection Grade	IP23
Current Collector	Traction force: F < 80N Movement speed: V < 120m/min
Brush Coefficient	Operation 2000KM, wear < 0.8mm Effective brush wear: 5-7mm Effective working pressure: 3.2-4.95N/cm&sup2
Environmental Indicators	High temperature resistance test: Ordinary type +55°C Low temperature resistance test -30°C Damp heat resistance test Relative humidity 95%, +25°C Atmospheric pressure 86-106KPa
Impedance	1.06 x 10^-3 Ω/m

BHFS-5-50A Trolley Busbar System