25mm2 Construction Hoist Busbar with features:
- Not taking up the load capacity of the lift: the Construction Hoist Busbar is fixed on the standard section, and the weight is decomposed into each standard section, which will not increase the load of the cage.
- Not affected by weather: the Construction Hoist Busbar is fixed on the standard section, no matter how windy it is, the slip contact line is stationary and does not affect the operation of the construction lift.
- Not easy to lose: the added value of the slip contact line is not high after dismantling, which is unprofitable.
- Damaged and easy to replace: the slip contact line is assembled parts, which parts are damaged, only need to replace the damaged parts, do not need to replace the whole, and parts replacement is relatively simple, only need to dismantle the joints can be replaced on site.
- No topping: when the construction hoist is equipped with slip wire, if the limit fails, the collector will rush out of the top of the slip wire, the system will automatically cut off the power, and the hoist will stop running, and will not be topped.
- Can be added according to the progress of the project: each slip contact line is 3016mm long, which is equivalent to the height of two standard sections, and the connection method is plug-in type, which can be added with the height of the standard sections.
- Can be recycled: the Crane Busbar System can be used normally for 4 to 6 years, when the project is completed, it can be used again.
Project Cases:
Case 1: Wufengshan Yangtze River Bridge
- Product model: BHFS-5-25D/130
- Initial installation date: 2018-1
- Total height: 200 meters
- Elevator manufacturer: Yi Cheng Heavy Industry
- Motor power: 2*12.5kW
Case 2: Tianjin Chow Tai Fook Financial Centre
- Product model: BHFS-5-25D/130
- Initial installation date: 2014
- Total height: 530 meters
- Elevator manufacturer: Tianjin Jinglong
- Motor power: 3*19kW
Case 3: JW Marriott International Doha, Qatar
- Product model: BHFS-5-25C/130
- Initial installation date: 2017-1
- Total height: 230 meters
- Elevator manufacturer: Sichuan Construction Machinery
- Motor power: 3*15kW
Case 4: Korea Hwaseong Dongtan Residential and Commercial Complex Project
- Product model: BHFS-5-25C/130
- Initial installation date: 2019-3
- Total height: 165 meters
- Motor power: 3*17kW
Case 5: Building NL5, Chongqing Nanchuan to Liangjiang New District Expressway
- Product model: BHFS-5-25C/130
- Initial installation date: 2017-1
- Total installation height: 230 meters
- Elevator manufacturer: Sichuan Construction Machinery
- Motor power: 3*15kW
