BHFS-5-8A Sliding Contact Line

8mm² Sliding Contact Line with features:

• Does not take up the load of the lift: the sliding contact line is fixed on the standard section, the weight is decomposed into each standard section, and does not increase the cage load.
• Unaffected by the weather: it is fixed on the standard section, no matter how windy it is, the sliding contact line is stationary and does not affect the operation of the construction hoist.
• Not easy to lose: the dismantling of the slip cables is not profitable as they have little added value.
• Damage easy to replace: it is assembled parts, which parts are damaged, you only need to replace the damaged parts, do not need to replace the whole root, and the parts are easier to replace, only need to dismantle the joints can be replaced on the spot.
• No topping: When the construction hoist is equipped with it, if the limit fails and the collector rushes out of the top of the sliding contact line, the system will automatically cut off the power, and the hoist will stop running and will not be topped.
• Can be added according to the progress of the project: the length of each sliding contact line is 3016mm, which is equivalent to the height of two standard sections, and the connection method is plug-in type, which can be added with the height of the standard section.
• Recyclable: The skidding wire can be used normally for 4 to 6 years, and when the project is completed, it can be used again.